6 Cuft Contractor Blast Machines

High-performance blast cleaning system removes corrosion, mill scale, and coatings from most surfaces.
Produces a uniform surface texture, and creates a surface profile to increase bonding for coatings.
Machine holds 6 cubic feet of abrasive for up to 30 minutes of continuous blasting at 100 psi with standard No. 6 nozzle (3/8-inch orifice).

Requirements for Operation:
These items are required but not included with this equipment:
Clean, dry, compressed air of sufficient volume to maintain desired pressure at the nozzle.
Refer to Air Consumption Chart in Blast Off 2 booklet (publication stock no. 09294).
Maximum working pressure 150 psi
Minimum pressure 30 psi needed to operate OSHA-required remote control valves
NIOSH-approved, type CE, supplied-air respirator.
Grade D breathing-air supply as defined by Compressed Gas Association Commodity Specification: G-7.1 (Refer to www.cganet.com).
Abrasive blast media specifically marketed for abrasive blasting and appropriate for your application.
Appropriate blast suit, work boots, hearing and eye protection.

Description of Operation:
The operator controls blasting from a remote control handle at the nozzle. Pressing the handle starts blasting; releasing it stops blasting. The blast machine contains abrasive and meters it into the compressed air stream.

Advantages:
Four-wheel integral cart for ease of moving.
Rated for 150-psi maximum working pressure.
1-1/2-inch Millennium valve provides unrestricted air flow.
Quantum metering valve maintains smooth, consistent flow, adjustment knob allows precise control of media flow.
29-inch width fits through standard doorways.
1-1/4-inch piping allows up to 50 percent increase in air flow, when compared to standard 1-inch piping
Robust handles act as skid for loading machine into pickup or trailer and protect valves and piping from damage.
Central hookup point for blast hose and remote controls.
Weather-resistant storage area holds manuals, paperwork and small parts.

Approvals and Certifications:
Clemco's quality management system is ISO 9001-2008 certified.
Blast machine pressure vessel built to American Society of Mechanical Engineers (ASME) specifications for 125-psi working pressure.
Vessel is hydrostatically tested and National Board-certified.
Remote control system complies with OSHA regulation 1910.244 (b).